Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

power input for a KLB-240 power amp

J

johnxb351

Member
Sep 22, 2015
23
13
13
55
Hi All I have a KLB-240 POWER AMPLIFIER what size amps power supply will i need to run amplifier. Can i run radio and amplifier off the same power supply. thanks
 

KLB240's have a pair of 2sc2290's, usually draw 16-20a if its not been fiddled with,

I would want a supply capable of 25a continuous or higher for the amplifier & 30a or higher if you want to run rig from same psu.
 
  • Like
Reactions: freecell and Tokin
I agree with Bob, 30 amps will work good.
A 50 amp would be a little overkill but in some cases a little overkill is ok.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Tim Chambers:
    Pres. Bill 2 FCC mod just posted
  • @ AWP:
    Is it possible to be on a lake and have a homing directional beam being emitted from the shore so a person could navigate to that beam's source? For example at night to a jetty.
  • @ BJ radionut:
  • @ BJ radionut:

    June VHF

    The American Radio Relay League (ARRL) is the national association for amateur radio, connecting hams around the U.S. with news, information and resources.
    www.arrl.org www.arrl.org
  • @ wavrider:
    sea que sea que,


      Top Bottom
      Back