• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

murs listening

doctor

Supporting Member
I Support WorldwideDX.com!
Aug 1, 2006
1,036
80
58
82
indiana
Boy murs is a dead chnl here, a little used radio frequency, havent heard anyone for 2 weeks now..
doctor/795
 

That's the beauty of MURS--it is an obscure, mostly unused band with no manufacturers making cheap bubble-pack radios for it.

That means that most people who do use it are using non-type-accepted equipment---there just isn't any type accepted equipment available!
 
That's the beauty of MURS--it is an obscure, mostly unused band with no manufacturers making cheap bubble-pack radios for it.

That means that most people who do use it are using non-type-accepted equipment---there just isn't any type accepted equipment available!

Could you suggest some frequencies for listening to murs on?
 
There are some listed on Ebay. There is a RS MURS radio as well as some others that "claim" to be MURS. I am surprised that as cheap as they make the FRS/GMRS radios they don't also do so with the MURS radios.
 
The base unit is the old radio shack business band radio 5 watt program the channels in it, they are around for a price , I am using a modified two meter radio now..see you on it on skip<ha>

doctor/795
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.