Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Transel Mark IIA Wattmeter


Set the control knob to "CAL" and then key the mike and use the lower knob to set the meter needle to the "set to line" position. Unkey then move the control knob to SWR (or READ, can't remember which one it is) and key the mike and read from the lower scale.

BC
 
Bionic Chicken said:
Set the control knob to "CAL" and then key the mike and use the lower knob to set the meter needle to the "set to line" position. Unkey then move the control knob to SWR (or READ, can't remember which one it is) and key the mike and read from the lower scale.

BC
Click to expand...

Thank You! It has Cal and Read on the SWR side of the control knob. Thats exactly where it had me confused, Thank You very much! This is an old meter my Father gave me and he has forgotten how to use it.:thumbup:
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom