Well as you all know I've been expermenting with making dipoles Today I made a dipole out of pvc and wire and it looks promising as far as laying on the floor my swr on channel 1 was 1.4 channel 23, 1.2 and on channel 12 it was 1.3. I knew it wouldn't be much better cause I tuned it for channel 20. Now if once I let the silicon and glue dry thoughrly I will try to get it out tomorrow and see how it works.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
pvc dipole
- Thread starter ron103067
- Start date
B
BOOTY MONSTER
Guest
this isnt pvc but i thought you might be interested . pretty simple and everything can be had at the local builders supply store .
N2AQS VERTICAL DIPOLES
a few good pics too , but im too cheap to pay to be a member with pic posting priviliges here .
N2AQS VERTICAL DIPOLES
a few good pics too , but im too cheap to pay to be a member with pic posting priviliges here .
I tried conduit and wire so far this works the best I took it outside and checked swr and it is even better outside. I can't wait for everything to dry so I can put it where I want and try to make a contact or two
