• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

2 Sencore SC61 Oscilloscopes

Low_Boy

Sr. Member
Jan 21, 2010
1,936
1,208
173
Rochester N.Y.
I have 2 Sencore SC61 Oscilloscopes with with frequency counter/ meter above screen.
#1 frequency counter works volts does not show sometimes this looses the beam and if you jiggle or play with the dials the beam comes back. Or the beam will show on half the screen.


#2 This one you can find the beam with beam finder. But that is all. Frequency counter works Volts do not show.

Included one Operation, Application and maintenance manual.
Both machines have problems and I would not know where to begin to fix them.
 

Pictures did not go through the first time
I have 2 Sencore SC61 Oscilloscopes with with frequency counter/ meter above screen.
#1 frequency counter works volts does not show sometimes this looses the beam and if you jiggle or play with the dials the beam comes back. Or the beam will show on half the screen.


#2 This one you can find the beam with beam finder. But that is all. Frequency counter works Volts do not show.

Included one Operation, Application and maintenance manual.
Both machines have problems and I would not know where to begin to fix them.
 

Attachments

  • IMG_0571.JPG
    IMG_0571.JPG
    111.3 KB · Views: 3
  • IMG_0572.JPG
    IMG_0572.JPG
    100.9 KB · Views: 2

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.