You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
If someone spread the coils in the back of your radio, simply push them back together.
Should be just fine.
People spread these coils to remove the filtering these coils provide. They do it because it puts out a few more watts output. The problem is, that the few extra watts it might provide are all nasty harmonics that are transmitting outside of 27mhz. It is a dumb practice to impress the uninformed that their radio is now putting out more power. Power meters can't tell the difference what frequencies are coming through it.
Any radio tech or hobbyist that has been around for awhile already knows this is nothing more than ignorant radio doctoring. Furthermore, it makes the final transistor transmit with an additional and unnecessary load. Just say 'no' to this kind of work!
Just was wanting to make sure that my radio wasn't messed up second hand radio you have people that replace parts to get more watts and modulation so they can bleed over everyone and sound horrible.
My radio is Uniden pc68xl any performance upgrades or improvements welcome.
would like to have best performance out of this radio as possible.
Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.