• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Connex SS3 Compact Mobile Amatuer Radio


Connex SS3

Thanks! It only took a few pages before I said to myself,'no more!'. I have been doing some research on whom I'd want to align my 959. DTB seems to be the best.
 
It`s usefullness is very limited on the Ham bands unless you are going to run it in the Ten meter AM sub band around 29 MHz, or use it for FM simplex.
This radio is built for the overseas market were AM/FM radios are used for CB type service.


73
Jeff
 
no ssb

It`s usefullness is very limited on the Ham bands unless you are going to run it in the Ten meter AM sub band around 29 MHz, or use it for FM simplex.
This radio is built for the overseas market were AM/FM radios are used for CB type service.


73
Jeff

I agree. I was wanting something that had a wide range of frequencies but I prefer to spend my time on ssb. M42Duster was inquiring whether or not I had any success in finding out the specs on the Connex SS3 Superstar compact radio. I went back through the forums on tiny export and found the link. The Connex SS3 goes up to 28.465? ;)
 
P.S.

It`s usefullness is very limited on the Ham bands unless you are going to run it in the Ten meter AM sub band around 29 MHz, or use it for FM simplex.
This radio is built for the overseas market were AM/FM radios are used for CB type service.


73
Jeff

What radios would you recommend then?:drool::drool::blink:
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.