• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

How to wire radio into mobile

jbo

Member
Sep 27, 2005
31
1
16
Oscoda MI
Newbie here, wondering how to best wire my radio into my 94 Dodge Ram. Go to battery or to fuse panel? Haven't done it before any suggestions would be great. Thanks
 
  • Like
Reactions: Rwb

Newbie here, wondering how to best wire my radio into my 94 Dodge Ram. Go to battery or to fuse panel? Haven't done it before any suggestions would be great. Thanks
An oldie but a goodie!
Looking for the old "golden Shovel", again.

On mine I ran the power directly to the battery positive and the ground to a bolt under the hood that goes straight into the front driver side fender.
Works great. Never a problem.
(Especially if you get into the habit of keeping your battery terminals clean)
 
Last edited:
  • Like
Reactions: Shadetree Mechanic
Newbie here, wondering how to best wire my radio into my 94 Dodge Ram. Go to battery or to fuse panel? Haven't done it before any suggestions would be great. Thanks
never use fuse panel.you create noise and might get low voltage. and welcome here too
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.