Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Dosy TFC 3001 Help and schematic needed

C

crvee8

Member
Jun 22, 2015
1
0
11
62
Hi,
I recently bought a used Dosy TFC 3001. It has two problems, a resistor in series with the meter lights is burnt and I can't figure out the value. Also the modulation meter isn't working which I traced to an open circuit diode that may be a germanium diode. There is no type written on the diode and I am unsure of the type used. Can any one help out please?
 

crvee8 said:
Hi,
I recently bought a used Dosy TFC 3001. It has two problems, a resistor in series with the meter lights is burnt and I can't figure out the value. Also the modulation meter isn't working which I traced to an open circuit diode that may be a germanium diode. There is no type written on the diode and I am unsure of the type used. Can any one help out please?
Click to expand...
You can call them direct and they are very helpful.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello


      Top Bottom