• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Looking for advice on tripod roof mounts

Mudfoot

Elmer
Jun 17, 2009
11,295
6,711
698
64
Southeast Ohio
I'm still looking for a place in the country. I don't want to put up a tower, nor do I want anykind of a pushup pole that needs guying. I want to do this on my house in the village. Saving my $ for tower when I find a place

I want a Cushcraft A148-20T
https://www.cushcraftamateur.com/Product.php?productid=A148-20T

Thinking of using a 5 foot Rohn Tripod mountwith TV rotor with a little thrust bearing. My shingle roof is 5 months old. That antenna andassociated hardware should be much of astrain.

Anyone using a tripod like that? I wouldn't mind a two element quad, either. The mount, rotor, bearing and control cable wouldn't be very expensive.

I want to gab on 2 meter SSB/CW, but the vertical would be handy for my occasional simplex chats.

Also, I think I want to use a power devider with this antenna. Only need one run of 9913F, but lose 3db gain. What say?
 

Nice, way cheaper than Rohn. I was worried about roof leaks. Talked to a friend tonight, said he'd trust it. He's an old roofer. Figured I'd avoid issues with such a light antenna. Never know, though.

Thanks for link.
 
  • Like
Reactions: Tallman

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.