• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

575-M6 switch?

JasonD239

Member
Mar 2, 2020
23
18
13
47
My 575-m6 switch broke when the mic hit the ground. The switch is not fixable so i removed it.
I could retro fix it with wires and the wrong switch but i figured i would check here in hopes someone has a source on one.
Thanks.
 

Attachments

  • 20220915_171513.jpg
    20220915_171513.jpg
    1.1 MB · Views: 15

My 575-m6 switch broke when the mic hit the ground. The switch is not fixable so i removed it.
I could retro fix it with wires and the wrong switch but i figured i would check here in hopes someone has a source on one.
Thanks.
How about a picture of the switch? Is that the same one as what's in the rd104e (road devil)? If so I may have a few of the old school good ones, not the junk switch they're putting in them now.
 
  • Like
Reactions: JasonD239
How about a picture of the switch? Is that the same one as what's in the rd104e (road devil)? If so I may have a few of the old school good ones, not the junk switch they're putting in them now.


I lost 1/2 of the broken switch. They look like this eBay listing. The seller wont ship USA.
ww.ebay.com/itm/115021552295
 
I have a small pile of the older type switches. Not the newer unmarked ones. I leave for work within an hour out of state and will not be back home until Sunday morning. PM me on Sunday if you cannot find one by then. I did buy some older boards from this seller if you want prefer that route as of now. These are the same switches I have.

 
I have a small pile of the older type switches. Not the newer unmarked ones. I leave for work within an hour out of state and will not be back home until Sunday morning. PM me on Sunday if you cannot find one by then. I did buy some older boards from this seller if you want prefer that route as of now. These are the same switches I have.
I bought one of these boards. I have a newer trashy key d104 regardless. if its a valid solution Ill get another.
Thanks.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated