Getting into tuning some radios, have a new 3400hp. Without clipping the limiter I can crank the modulation up and get about 35ish watts. Problem is my dead key is too high to run an amp. Anyone know how to drop the dead key on these radios?
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Connex 3400hp mod
- Thread starter Edgertont146
- Start date
Just click on the link and choose your radio.The 3400 has variable power, you should be able to just turn the ref power on the front.
EPT 3600-14C I think same as the DX 33
Lots of info in this thread below if you are wanting to lower the carrier without affecting peak power.
If you just want to turn the carrier down its vr-13
www.worldwidedx.com
73
Jeff
Lots of info in this thread below if you are wanting to lower the carrier without affecting peak power.
If you just want to turn the carrier down its vr-13
Swing Kit Vs. NPC (ept3600)
Would you like to explain the difference? On a galaxy what mod is a swing kit and what mod is an NPC? It depends on the pc board in question, on a DX66V (ept360014) a swing kit is 1N4001 diode added in series with R238, sometimes hackshops just remove the resistor and install a diode in place...
73
Jeff
Last edited:
Thanks!EPT 3600-14C I think same as the DX 33
Lots of info in this thread below if you are wanting to lower the carrier without affecting peak power.
If you just want to turn the carrier down its vr-13
Swing Kit Vs. NPC (ept3600)
Would you like to explain the difference? On a galaxy what mod is a swing kit and what mod is an NPC? It depends on the pc board in question, on a DX66V (ept360014) a swing kit is 1N4001 diode added in series with R238, sometimes hackshops just remove the resistor and install a diode in place...
73
Jeff