Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Project Boxes 3D Printed

danmcclain said:
If you want me to print some again, it no problem.
Click to expand...
They will work just fine, no need to reprint anything.

I just wanted to mention my design errors before someone says "hey, its longer than your gamma will be" or comment on the big hole I ground into it lol.

The prints were spot on, exactly what I asked for. That printer you have is pretty impressive and I will definitely want to do this for VHF soon. I know they will be strong enough from the feel of these.

Thanks again!
 
brandon7861 said:
They will work just fine, no need to reprint anything.

I just wanted to mention my design errors before someone says "hey, its longer than your gamma will be" or comment on the big hole I ground into it lol.

The prints were spot on, exactly what I asked for. That printer you have is pretty impressive and I will definitely want to do this for VHF soon. I know they will be strong enough from the feel of these.

Thanks again!
Click to expand...
You did the hard part, designing the files, I only printed what you gave me.
 
  • Like
Reactions: brandon7861

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom