Navigation

Browse albums

Gallery statistics

Albums
785
Uploaded media
6,182
Embedded media
1
Comments
918
Disk usage
4.2 GB

Trending media

  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

Media added by Peter Walker

Lower Matching Section after final assembly - right

Lower Matching Section after final assembly - right

  • Reaction score 0
  • Comments 0
Lower Matching Section after final assembly - left

Lower Matching Section after final assembly - left

  • Reaction score 0
  • Comments 1
Upper Matching Section after bending

Upper Matching Section after bending

  • Reaction score 0
  • Comments 1
Detail of Lower Matching Section ready for Mounting

Detail of Lower Matching Section ready for Mounting

  • Reaction score 0
  • Comments 0
Lower Matching Section Wire with Ring Terminal and Heat Shrink

Lower Matching Section Wire with Ring Terminal and Heat Shrink

  • Reaction score 0
  • Comments 0
Soft Copper Tubing Ready for bending

Soft Copper Tubing Ready for bending

  • Reaction score 0
  • Comments 0
Soft Copper Tubing After Riveting

Soft Copper Tubing After Riveting

  • Reaction score 0
  • Comments 0
Mounting Flat Should be 1/2" in length and Soft Copper Tubing Main Length should be 42"

Mounting Flat Should be 1/2" in length and Soft Copper Tubing Main Length should be 42"

  • Reaction score 0
  • Comments 0
Flat area bent into Soft Copper Tubing and ready for 1/8" Hole to be drilled for Aluminum Rivet

Flat area bent into Soft Copper Tubing and ready for 1/8" Hole to be drilled for Aluminum Rivet

  • Reaction score 0
  • Comments 0
Soft Copper Tubing for Upper Matching Unit Bent over for mounting

Soft Copper Tubing for Upper Matching Unit Bent over for mounting

  • Reaction score 0
  • Comments 0
1/8" Holes drilled for Upper Matching unit

1/8" Holes drilled for Upper Matching unit

  • Reaction score 0
  • Comments 0
SO-239 Connection Riveted onto the Milford Hanger

SO-239 Connection Riveted onto the Milford Hanger

  • Reaction score 0
  • Comments 0
5" Wire Soldered and Heat Shrunk onto SO-239 connection

5" Wire Soldered and Heat Shrunk onto SO-239 connection

  • Reaction score 0
  • Comments 0
Picture showing sections after soldering

Picture showing sections after soldering

  • Reaction score 0
  • Comments 0
Top and Bottom Sections Mated

Top and Bottom Sections Mated

  • Reaction score 0
  • Comments 0
Picture showing alignment of antenna sections

Picture showing alignment of antenna sections

  • Reaction score 0
  • Comments 0
How the spacing blocks were held in place

How the spacing blocks were held in place

  • Reaction score 0
  • Comments 0
Bottom Antenna Section with Wooden Blocks in place to maintain 2" Spacing between elements

Bottom Antenna Section with Wooden Blocks in place to maintain 2" Spacing between elements

  • Reaction score 0
  • Comments 0
Lower Matching Section In place for reference

Lower Matching Section In place for reference

  • Reaction score 0
  • Comments 0
Bottom Mounting Section

Bottom Mounting Section

  • Reaction score 0
  • Comments 0
Tee Section Soldered

Tee Section Soldered

  • Reaction score 0
  • Comments 0
Top Cap Soldered on

Top Cap Soldered on

  • Reaction score 0
  • Comments 0
Upper and Lower Antenna Sections Mated by the Female Coupler

Upper and Lower Antenna Sections Mated by the Female Coupler

  • Reaction score 0
  • Comments 0
Antenna sections cleaned up and ready for soldering

Antenna sections cleaned up and ready for soldering

  • Reaction score 0
  • Comments 0
Top Bottom