You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
I use a tek 7603 with two 7a29 vertical amplifier plug ins with a 7b80 time base. Does everything I need it to too. The cool thing with the 7603 along with some others is that is has the plug ins. So, if one wants to delve off into testing something else, plug-ins can be had for those testing...
It depends on whether the radio is mounted above or on the dash. If above, 21' is not long enough. There is also a rubber grommet at the bottom of the kick panel on both sides under the floor mat.
Another reason to angle a coil antenna forward (when applicable) is to get the coil away from chrome visors (if the truck has them) or to get the coil out away from the body of the truck.
I doubt toshiba halting the production of the 2290 and 2879 hurt their profit margin much lol. The transistors are just a small drop in the pond of all the products they have made/make.
This isn't a modification thread, more so a troubleshoot thread. I have a first generation 497 (the one that is loosely based on the ept3600 series chassis with the 2290). It shows perfect modulation on the scope with 110 watts pep according to the lp100a. The issue is that it has no receive...
Is there a suitable replacement for the 2sb817 that Is capable of handling more current? I have a galaxy 959 with dual 13n10s with a 13n10 as a driver. It is doing 55 pep, I put a 2sb817 in it, but even it gets pretty warm. Is there a suitable replacement capable of more? Any help would be...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.