• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

Latest activity

What's new Featured content New posts New media New media comments New ims items New profile posts Latest activity
  • TM86
    TM86 replied to the thread So much for resale value (TRS Challenger 1400)..
    Recap done, it appears to have been successful. Found both dry and liquid crud under some of the caps. All cleaned up now, of course...
  • CSA1863
    CSA1863 reacted to Hawkeye351's post in the thread Schottkey diode/transistor opinions with Like Like.
    Here is what I did just a couple hours ago while it's quiet on every band: I realigned the radio by just the signal generator. Went...
  • D
    Danzik replied to the thread CPI 2000 issues.
    I now can get some signals off of it but I am at .5 micro seconds on the sweep time/ div this is pin 11 on the ic I replaced
    • 20251220_210417.jpg
    • 20251220_210430.jpg
  • Shadetree Mechanic
    Shadetree Mechanic reacted to fourstringburn's post in the thread Rg316 or Rg400 1' jumpers with Like Like.
    I use RG8(not rg8x) for jumpers. RG8 is nice and flexible for jumpers and because I use solder crimp connectors, the larger coax makes a...
  • D
    Danzik replied to the thread CPI 2000 issues.
    Hi, Thanks for your reply, I have adjusted just about everything on this scope when it comes to getting a waveform from the radio and...
    • 20251220_204236.jpg
    • 20251220_204352.jpg
  • D
    Danzik replied to the thread CPI 2000 issues.
    Hi Nomad thanks for the reply, I think you were correct about the age of the scope though and I do not think it is operating properly. I...
    • 20251220_203237.jpg
    • 20251220_203303.jpg
  • D
    Danzik reacted to nomadradio's post in the thread CPI 2000 issues with Like Like.
    The dot scans from left to right at a rate that makes audio signals legible. An RF waveform naturally moves up and down way too fast to...
  • Y
    YardDog reacted to 2RT307's post in the thread I won a Radioddity QT80! with Like Like.
    Hey gang! I recently won the Radioddity QT-80 right here on the Worldwidedx.com Radio Forum! I received the rig today, and was able to...
  • 9
    9633 replied to the thread Any channel plan for FM?.
    Impressive.!
  • 9
    9633 reacted to Rick330man's post in the thread Any channel plan for FM? with Like Like.
    I think it was about two years ago when Brother DXer and his local radio community would hang out on FM 30. I hooked up my 40 channel...
  • Rick330man
    Rick330man replied to the thread Any channel plan for FM?.
    I think it was about two years ago when Brother DXer and his local radio community would hang out on FM 30. I hooked up my 40 channel...
  • BC Coyote
    BC Coyote reacted to AudioShockwav's post in the thread Any channel plan for FM? with Like Like.
    You should be able to get there, don't forget the channel arrangement is slightly mixed up in the original 23 channel frequency...
  • 9
    9633 reacted to AudioShockwav's post in the thread Any channel plan for FM? with Like Like.
    You should be able to get there, don't forget the channel arrangement is slightly mixed up in the original 23 channel frequency...
  • AudioShockwav
    AudioShockwav replied to the thread Any channel plan for FM?.
    You should be able to get there, don't forget the channel arrangement is slightly mixed up in the original 23 channel frequency...
  • 9
    9633 replied to the thread Any channel plan for FM?.
    Thanks for that tip! I will give it a try. My RCI's never did that as I recall.
Show older items
Top Bottom