Recent content by columbas

Pxistaa , can you post the video of the npc mod for the 6666pro or let us know where to go on the web to watch it? The 6666pro is not the same board as the at-6666

You dont have to use the cps 2.05 Use the cps 2.02 and you will have all the bands for the radio. The cps 2.02 works with all the firmware.

Has anyone used the 1.02 beta firmware on the 6666pro ? I have seen this on Delboy,s website . If you have please inform us or me rather if it had helped the radio showing the SWR on SSB more accurately as they claim it will

As everyone knows the antenna connector is hard to get to on the back of the radio. So I had several company 2 meter radio's laying around with their antenna connection made with about 6 inch coax cable with a connector for a pl 259 on the end. To make it short I took that off that radio and...

If anyone is having issues with the radio showing high SWR even though your SWR is fine according to your external meter, Delboy.s web page there is a 1.02 firmware in Beta format that can be used to correct this problem. So far on the Anyone web page they haven't shown it yet.

On 15 meters SSB Power All Way Up 20 to 25 watts. SWR is 1.2 The antenna is a G5RV DIPOLE 80 meters to 10 meters. My meter is a Diamond sx-600. I was disappointed that this is all it would do on 15 meters but as the gentlemen had stated earlier this band was extra and not really intended to...

BlueBeam was very nice but I didnt get any information on the swing diode modification for the 6666Pro. I was really hoping he had that information. I guess in time someone will have this information and will share it with the rest of us. Thank you for the help. God Bless

I have had no luck with anyone that I have contacted on getting the information of the anytone 6666Pro swing diode modification or finding information on any forum of how to do this modification for this radio. Surely in time someone can provide this information I want to thank everyone...

I believe the am could be improved as stated in previous post. But I have had good reports locally and on dx contacts. I haven’t had any complaints. Yet. The ssb is fantastic. I am 100 percent satisfied with the performance on ssb. On the am if it would do as I have asked many times it...

My 6666Pro did the same thing from factory. But, 20 watt dead key will eventually blow the finals. Get hotter. That is way too much dead key. I set mine to 7 watt dead key. I am still looking for information on a swing diode modification for the 6666Pro

That is true all the more reason to have the low 2 watt dead key. I am still waiting for info on the 6666pro so I can mod it to have that low dead key and swing. Thank you for your reply.

To get this radio to full power when you turn the radio power up Anytone has it set for a dead key from factory of 20 watts. That dead key is way too much it will eventually burn the finals up not to mention the radio gets extremely hot. I added fans to the back to get it to run cooler but...

It would had been nice if he took a picture of the swing diode mod before he sent the radio back. The reason I am wondering is the swing diode mod is suppose to perform for example 2 watt dead key to full power . From what he described it wasn't going to full power from a low dead key. On all...

What setting do you suggest to avoid the pinch ?

I believe like you do about AI. I figure in the future if there is one that AI will end up being like in terminator. Turn against try to kill us turn against us all lol