You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Yeah I see I left out a few words . What I was using as a coil form was a piece broom stick. It varies a little but lets call it an inch (22mm) Starting at the bottom wind 2 1/4 turns close wound now you need a 1/2 inch gap between 2 and 3 for the tap to the coax center connector. Now continue...
I am sure this is old but This works well to repair older antenna Take a bit of 12 ga. solid wire and wind a coil tightly upon it tapped 2 and 1/4 turns up from the bottom. At this tap connect the center of your coax The shield and the ground planes connect at the 2 and 1/4 dowm end and the and...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.