Recent content by David Eden

I worked for Kenny he was a good guy to work for . I could not begin to count how many tube sockets I soldered into those boards.

I worke

Why don't you just make the boards yourself . It's actually quite easy . Especially something that simple. You can buy the board on eBay and you can use muratic acid to do the etching or you can buy the regular chemical for etching . But if you want them to look professional you need a laser...

I used to work for Kenny when his place was on nw expressway in okc .

The only thing that needed to be changed for 11 meter was on was on top of the variable capacitors the coil that connects to the vc would need to be re soldered to the black mark made by a sharpy . I used to work for Kenny building them . Not sure about the green wire you are yalk8ng about and...

Rf parts has those I believe

Rf

Do you still have any of the 2sc 1969 or the 2sc2166 rf transistors left ?

Thank you so much for your help.

Kenny was a good guy to work for.

I have to wonder if we had worked together there. It would have been probably in 1977 or 78.

I possibly built the board in that all I saw after work driving home were the bottoms of the board and tube socket pins that I had soldered . I must have soldered thousands of those boards .

Well I have the 118 in my cart on ebay just have to put some money in my account so I can order it . It says there is only one left , so maybe I better order it tomorrow lol. T I and thanks again.

Yes pretty much the block diagram would Pretty much the block diagram would be nice too. And thanks for the fast response.