You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Was there any reason to goto the smaller tube coil instead of the flat aluminium that you was using before. I am just curious......
And how is the performance better, same, or worse????:redface:
@Robb:
Barefoot: Channel 1 1.0:1, Channel 20 1.0:1, Channel 40 1.05:1
With a 100 watt dead key channel 1 1.2.:1, channel 20 1.2:0, channel 40 1.3:0
As for receive so far it is very good but to early to compare. Will work it for the week and hope to have a good comparison by then...
Thanks alot HomerBB
Have got the parts. They came up to about $22.00 bucks. Will cut and drill everything shortly maybe take about an hour....:D I hope.
HomerBB
How did you get the coil to those sizes diameters
1st - 8" w/3" coil diameter
2nd - 6" w/6" coil diameter
3rd - 4" w/8" coil diameter
Because I see you rapped the flat bar around what looks like a 5 inch pvc. And I think the 8,6,and 4 is the length.
Thanks alot HomerBB
That will help me alot.......on a budget and I can build this for around $20-$25 bucks. I will use the larger copper tubing because that's just me. Will use all copper expect the coil and the screws. And my insulator will be on the inside not the outside I will see what...
I have a question. The flat aluminum bar and the insulator how long was it and the copper tubing what size was it also and how long. May try this myself but need the measurement. thank......:thumbup:
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.