• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

Recent content by Edgertont146

  1. E

    Galaxy 33hp2

    I’m at work now but I will check when I get home, thanks
  2. E

    Galaxy 33hp2

    Ic7 was bad, replaced it now all bands have voltage. Next problem is I can’t get a frequency lower than 27.600 and the channel selector doesn’t change frequency when you roll through channels
  3. E

    Galaxy 33hp2

    Pin 1 on ic5 has 3.5v on band d, the rest of the bands have around 7.5. Voltage at tp2 channel 1 is 3.4v Channel 40 is 2.9v. Im guessing I have a faulty component causing the low voltage on band d
  4. E

    Galaxy 33hp2

    it’s stuck on 27.495 Not sure if anyone tried messing around with it or not I bought it used. A-d bands it won’t key, e and f it will key that frequency and swing plenty of power. Selector switch isn’t bad
  5. E

    Galaxy 33hp2

    Got a Galaxy 33hp2 stuck on one frequency. change bands and channels but still transmits on one frequency. Any ideas?
  6. E

    Connex 3400hp low volume

    Just found the problem, capacitor c145 loose solder joint. Brand new radio too
  7. E

    Connex 3400hp low volume

    Tried a few mics, they all work on other radios
  8. E

    Connex 3400hp low volume

    Volume does increase when turned up, external speaker works like it should but still low volume with that
  9. E

    Connex 3400hp low volume

    Radio receives good but volume is super low, receive volume and talkback. Turning the volume all the way up makes it decent but not anything like it should be. Any ideas?
  10. E

    Stryker 447hpc2 conversion

    Thanks!
  11. E

    Stryker 447hpc2 conversion

    Just ordered a new Stryker 447 hpc2. Wanting to convert to 11 meters myself. Does anyone have any info on this? Thanks
  12. E

    Connex 3400hp mod

    Thanks!
  13. E

    Connex 3400hp mod

    Getting into tuning some radios, have a new 3400hp. Without clipping the limiter I can crank the modulation up and get about 35ish watts. Problem is my dead key is too high to run an amp. Anyone know how to drop the dead key on these radios?
See more
Top Bottom