• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Recent content by Josan

  1. J

    President Mckinley 1011001 no tx/rx.

    What would be my next step to do after replacing the regulator? Thanks 73
  2. J

    President Mckinley 1011001 no tx/rx.

    What would be my next step to do after replacing the regulator? Thanks 73
  3. J

    President Mckinley 1011001 no tx/rx.

    I checked pin 9 of the and i has 8.59volts but the rest has low voltage pin 6 has only 0.85v.
  4. J

    President Mckinley 1011001 no tx/rx.

    Thanks for the reply nomadradio. I use the main filter cap as my ground source and i got 8.53v on pin 1 of the regulator but pin 6 still has 0 5v. I ordered a new regulator
  5. J

    President Mckinley 1011001 no tx/rx.

    I check the volatge on the MB3756, here is the reading. 1. 6.5v 2. 13.4v 3 13.4v 4. 0v 5. 13.3v 5. 0.5v 7. NC 8. 0.6v
  6. J

    President Mckinley 1011001 no tx/rx.

    Yes Jeff that's the one 73, JM
  7. J

    President Mckinley 1011001 no tx/rx.

    It'a the old one
  8. J

    President Mckinley 1011001 no tx/rx.

    Hi to all. I'm new here and new on the hobby too and i want to learn so i bought this president mckinley cb radio. It has no rx and tx. The radio powers in but the green light doesn't turns on but i can see it blink when i switch the radio on and turns it off Hope the gurus here could teach...
See more
Top Bottom
Back