Recent content by kb9ikh

hi everyone.. looking for the dimensions for a Finco stinger 540.. 1 inch square boom. 5 elements. aprox. 21 ft long ..any help would be great..

anyone have the 465 clarifier mod handy? john

between 14 and 35 amps....i have used 3 different supplies

i have a 148 cobra that seems to have what sounds like ac ripple in the am/ssb audio.. i have swapped out power supplies with 3 different supplies and the 148 still has the rippling sound in the audio...it's more predominate in the ssb but is there on am as well...this is with a stock cobra mike...

cobra 148gtl with motorboating in ssb/am audio i have a 148 cobra that seems to have what sounds like ac ripple in the am/ssb audio.. i have swapped out power supplies with 3 different supplies and the 148 still has the rippling sound in the audio...it's more predominate in the ssb but is...

hi.. i have a emperor 5010 that i need to de-tune on sideband..assuming the radio is unmolested, other than the frequency mod. by using vr 103 ssb power, will i be able to bring the ssb power output down below 20 watts pep? preferably below 18 watts? my plan was to use a small 2 pill amp..bout...

emperor detune hi.. i have a emperor 5010 that i need to de-tune on sideband..assuming the radio is unmolested, other than the frequency mod. by using vr 103 ssb power, will i be able to bring the ssb power output down below 20 watts pep? preferably below 18 watts? my plan was to use a small 2...

i have a emperor 5010 that i wanted to make a microphone adapter for...what i run into is as soon as i plug a mic plug into the mic jack,be it wired or not, the radio starts changing frequencies......this is 1 radio i dont have much experience with ...any help would be great. john

shure mic or ge 19b209694p1? hi all i have what seems to be a shure non amplified desk mic..controlled magnetic 19b209694p1 is on a sticker on the bottom plate...trying to find out if indeed this is a shure manufactured mic.. if so whats the true model number ? if not, whats the ge model...