-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Recent content by MrJace
-
M
RCI 2950 No transmit indicator
It seems right now that the CPU is already messed up, so that is something I would have to look at doing with a good CPU board after it's operational again. My main pcb is part# EPT295013Z which was usually found on the 2nd gen radio. I have the battery so it's definitely the 1st gen.- MrJace
- Post #7
- Forum: CB Radio Modifications
-
M
RCI 2950 No transmit indicator
Grounding pin 2 cuts sound, but the tx indicator on the lcd is still a no go. I'm thinking this would make a parts radio at this point, the cpu boards are scarce.- MrJace
- Post #5
- Forum: CB Radio Modifications
-
M
RCI 2950 No transmit indicator
It's the older version pre 1995 I believe. Has the battery spot on the board, with the multi board cpu design instead of the single board they changed to after 95.- MrJace
- Post #3
- Forum: CB Radio Modifications
-
M
RCI 2950 No transmit indicator
1st gen 2950 (appears someone did change to the blue led for display). Radio will power up, and I hear the static floor. I do not believe I am receiving or transmitting. When I key the mic, the TX does not come on the lcd display. The frequency knob on the left above the mic plug also does not...- MrJace
- Thread
- Replies: 6
- Forum: CB Radio Modifications