-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Spec2079's latest activity
-
Spec2079 replied to the thread 142 gtl issue.They don’t do anything also hear the tone on all channels -
Spec2079 replied to the thread 142 gtl issue.Thanks will work on it
-
Have a close look at the 10mm RF/IF coils with the small tuning slug. Any of them that appear to peak with the slug DEAD EVEN with the...
-
Spec2079 replied to the thread 142 gtl issue.
-
Spec2079 replied to the thread 142 gtl issue.Update: replaced a bad can has fully transmit power on all modes now but still have very low recieve even with my signal gen
-
Spec2079 replied to the thread 142 gtl issue.Receiver is alive on ssb meter does move bit but I get nothing on am
-
Spec2079 replied to the thread 142 gtl issue.It’s not the audio chip as I have a working radio and pulled out that audio chip from it and installed it in 142 gtl so something else...
-
Spec2079 replied to the thread 142 gtl issue.Oh k thanks
-
Spec2079 replied to the thread 142 gtl issue.I have tried several mics same result I get modulation on ssb also puts out 20 watts only on ssb I can here my self on my test radio...
-
Spec2079 replied to the thread 142 gtl issue.Board #PC-385AG Made in Taiwan
-
Spec2079 replied to the thread 142 gtl issue.It’s a 142 gtl base station
-
Spec2079 replied to the thread 142 gtl issue.This one is a 142 gtl has ssb out put but no am output or modulation also no pa modulation
-
148 gtl has ssb but no am power or receive also has no audio on pa mode
-
Spec2079 replied to the thread GI JOES Electronics.Never met the guy but liked all his his YouTube video's rip buddy
-
Spec2079 replied to the thread Strange issue 148 gtl.Well here is an update I adjust l19 becomes intermittent since I can hear it on my test radio as i adjust it as for the am regulator...
