-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
SuperLid's latest activity
-
SuperLid replied to the thread Various Radios 10m and Amateur HF For Sale.Reasonable offers will be entertained! -
SuperLid replied to the thread Anytone Ares 2.Get your hands on a spectrum analyzer and have a look at the spectral purity. At that point, we should discuss it. Since we are talking...
-
SuperLid replied to the thread Anytone Ares 2.I tested QT-40 and QT-60 for spurious. Both were well within acceptable FCC limits.
-
SuperLid replied to the thread Anytone Ares 2.RFI into computer speakers, does not mean the TX is spurious. It means your speakers are susceptible to RFI, due to rectification...
-
I have several radios that are either on consignment or belong to me for sale. All have been checked out or restored/aligned by me here...
-
SuperLid replied to the thread Anytone Ares 2.I did this months ago and discussed it here. I also tried the 68pF cap at that time, which is intended to match the new "upgraded"...
-
SuperLid replied to the thread Anytone Ares 2.I have 50+ watts from my Ares II. But....I modded the PA.
-
SuperLid replied to the thread Anytone Ares 2.It does nothing.
-
SuperLid replied to the thread Anytone Ares 2.I spilled the beans on here a while back. The 68pF is nothing new either. It is a mod that was used by Stryker, that doesn't really do...
-
SuperLid replied to the thread RTTY and CW using computer hookup issue.I mentioned my issue with the plug n poop, thinking maybe there is a similar issue going on here.
-
SuperLid replied to the thread RTTY and CW using computer hookup issue.I had a problem with my Icom transceivers keying the rigblaster plug n play. Their solution was to use the PTT from the 13 pin DIN...
-
SuperLid replied to the thread Don't be afraid of ladderline.I mentioned in this thread I have a doublet with transmatch, feeding 450 ohm balanced line, using the 1:1 internal balun in one of my...
-
According to This coax loss calculator, a 150 foot run of RG8x with a 1:1 match on the antenna end, 100 watts in will get you 58.498...
-
I run legal limit+ to a non resonant ladder line fed doublet on 10 - 160 and have had zero issues with RF in the shack on any of the...
-
SuperLid replied to the thread Don't be afraid of ladderline.I use a doublet with ATR-30 as well. However, I rewound the crappy balun with coax. I tested the as built balun as trash. The coax...
