hey booty that almost looks like a sigma 5/8 which was a great performing antenna.its not a maco but my homebrew uses the same basic tuning method . i initally had the vertical 23 feet long but now its at 22 1/2 feet . i used pretty large tubing for my verticle , 1 3/8 , 1 1/4 , 1 1/8 and 1 inch at the top with a 1 inch wide by 1/8 inch thick aluminium strip for the tuning ring .hey booty that almost looks like a sigma 5/8 looks good to me.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
maco 5/8 to maco .64
- Thread starter 1342
- Start date
B
BOOTY MONSTER
Guest
the sigma doesnt have a taping point on the ring to use for tuning purposes like the maco and my home brew does . thanks for the compliment though . im still messing with it 
Nice thing about this design is that you can adjust your bandwidth adjustment at the last section of the vertical and the swr at the tapping point so this design will take you from 10 to 12 meters.
I think what Mack was getting at was by adjusting the resonant frequency you can move the useable bandwidth up or down to whichever part between 10 and 12m you prefer, I don't think he meant you can vary the bandwidth.
Sometimes it pays to read the post fully and to try and understand not everyone words things the same way. Instead of trolling for an argument.
- No one is chatting at the moment.
-
-
dxBot:63Sprint has left the room.
-
dxBot:kennyjames 0151 has left the room.
-
-