Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

sra-158 vs astatic 636l

1

123kid

Active Member
Mar 6, 2012
328
36
38
40
i have a ranger sra-158 hooked up to my anytone it sounds great its using a adapter 6 to 4 but i dont want to swap connectors incase i need the mic for my rci.I can get the texas ranger 4 pin version or a astatic 636l which would be the better choice?
 

Hell, buy both and see for yourself it's not that much to invest, you may be surprised that the stock mic matches you voice better than the Astatic.:whistle:
 
Will the 636L be an marked improvement over my stock mic? Or am I better off going to an amplified one?

Thanks,
Jim
 
You're comparing noise canceling to non noise canceling. A lot of people keep their mic gain cranked wide open and then use a noise canceling mic, when they could do just as well learning how to use the mic gain.
 
  • Like
Reactions: 1 person
From what I've read, most users greatly improved how they sound by replacing their cheap stock mic with a better quality one. That's all I'm trying to do. Just not sure which will work best with my measly 3 watts. And don't have a lot of money to spend experimenting.
 
Last edited:

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Wildcat27:
    Hello I have a old school 2950 receives great on all modes and transmits great on AM but no transmit on SSB. Does anyone have any idea?
  • @ BJ radionut:
  • @ ButtFuzz:
    Good evening from Sunny Salem! What’s shaking?
  • dxBot:
    63Sprint has left the room.
  • dxBot:
    kennyjames 0151 has left the room.


      Top Bottom
      Back