-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Sears SSB Power Connector
- Thread starter Justin B.
- Start date
I think the mobile/base had 2 different cords, if that's what you're referring to, one for 12V DC and one for 120V AC...like the JC Penny radios. Hard to find.
The 23 channel SSB base/mobile radio and the Slant Face SSB/mobile radio had that 6 pin like Smokinone mentioned. Out of all the SSB Sears radios I have, the AC cord was more common. I think I only ever had ONE DC 6 pin connector. I ended up wiring directly to the board inside on some of them.
Make me a decent offer for my dc cord... Don't know why bought the radio in the first place...
Yep, I had 1 AC cord for one of the radios, and the second I added wires internally for one, and then used some butt connectors to the external plug for the other.
Works OK, just looks a little funny.
I salvaged the male plug from an old ATX computer power supply. Those were ideal. After a little internal connection mod and chassis tweaking to the CB, you’re good to go. That computer AC cord also give it a stock appearance. An upgrade IMO.