Search results

I have been very pleased with the browning double shield rg8x jumpers and coax with the molded ends.

What happened to the guy that made the m80 modulators? His site is still up and I ordered a few of his different kits but they were never shipped and PayPal refunded my money.

Because it is a stock radio. A properly set up NPC-Rc mod will give you the swing you are looking for. Should be similar to the 2950 surface mount board.

The George is a snooze fest. Who wants an ssb radio that cant even slide between channels?

I have taped lightly on the elements before and got them to start working, I like the electret condenser elements but they don't match the warmth of the old element. Also I recommend cleaning the leaf switch with a burnishing tool, and if the mic has a lazy bar and a chicken choker I add a small...

Lets just put that same display on our new President George. They may have found a solution, or they have deep pockets for warranty work.

The old Shure "Ranger" mic sure looks neat.

90% of the radios we sell across from the truck stop on I40. It is hard to get my boss to order the ssb models because they set longer. Hopefully this one will be a little cheaper than the 39vhp plus.

I run the big galaxy 2517 on my base, nice big meters, good receve stable and I find it quite fast for scanning through the 3 bands of 11 meter I run. If I had the extra cash I would bring home a 69 base for the 10 and 12 meter coverage as It is just an updated version of the same board. Good...

Maybe 1.5 carrier going in was enough to saturate the mosfets then excess power goes back to the radio as reflect.

my 69vhp has no flicker, more stable than one of my locals 955 version1. The 6900xxx series boards are as stable as any old school uniden when working properly. The digital radios don't tell on themselves when they drift .

I just got my hands on 1 of these, I like the way these things swing from a low carrier, amp ready out of the box.

The 69ffb4 was pretty stable on ssb even with the 500watts of heat on the bottom. My Galaxy 95t is also very stable with 150 watts heat on the bottom. I have ran an unstable 95t2 that was putting out close to 250 and it drifted like a sailboat and soon found a home with a lover of big watts...

It is sad how much good information has been lost from the glory days of bbs and web forums. Now search results on google are an endless stream of ai generated garbage or you have to watch a 30 minute video for a piece of info that you could have found in 2 minutes scanning a forum post.

As far as "Best ssb CB radio under 300" the 959 would be my choice of fcc approved cb radios. Good power output that can be improved with a better final transistor, easily modifiable for extra frequencies unlike any other ssb cb currently available. Tone control on receive, good frequency...

I never knew there was a kriss 600ssb, This is awful I am running out of room for my tube amp collection.

Sometimes condensation in between sections of an aluminum antenna can cause swr spikes, I had this issue with my sigma venom until I used a stainless self taping screw to tie all of the sections together and the issue has not came back. Also check the low pass filter coils in the cobra 29, If...

When an amplifier or radio goes into oscilation it will output many other frequencies besides the 27mhz that your antenna is tuned for. Your antenna cannot radiate the rf that is outside of its resonance so all of that junk rf comes back as reflect/swr. Because of the way the biasing works on...

Your radio may be suffering from an issue I have seen on 2 diferent rci69vhp. Mismatched mosfets in the driver or final section can cause oscillation which could explain the higher swr. What are you using to measure the swr?

Nice work, I enjoy your YouTube videos.