Search results

After we install it and it works I will post the diminsions and all we did to assemble it. It does show continuity right now Thanks again for your and Shockwave's advise.

We got the Ant match together jus as it was sent to me so now were just waiting for the rain to stop and put it on and try again

Shockwave, Thanks for your reply. I had thought about that myself but was hopeing to keep the CRL lookin original but that may not be an option. I have been looking at V58 and penatrator designs as well thinking they might work but I was hoping to hear from someone elses ideas on it. I think...

You are correct Sir. Thanks for the comments on the 2000. I really like it and I use a RCI 2995DX as well. Both are great radios. Yes it is my plan to replecate the coil you sent me but Im still curious on wheather the mock up (coil inside a coil) would have an effect on standing wave. Thats...

http://www.worldwidedx.com/attachment.php?attachmentid=13741&stc=1&d=1405558126 This is just a mock up of what we have. Outside coil is connected to SO center to ant radiator Inside coil is connected to sheild side of SO and Center pin SO

http://www.worldwidedx.com/attachment.php?attachmentid=13735&stc=1&d=1405555184 I hope this makes sence. Tommorow I can take assembly back down and take a pic of it. All connections have been made and recieve works excellant. It looks simmilar to a A99 coil set up. Tried to upload a pic of...

And just out of curiosity, Was the one you sent me a working model? If so what kind of SWR did it have?

No pics. To make the story short, my neighbor and I both have CLR 2's and we are puting the ant match together per your direction sheet,pic and our interpitation of what we see. Our measurments are the same as yours on the drawing you provided. So we start putting it together and insted of both...

Ok Now the learning process begins. "Help us Obe one Marconi". Followed directions you had drawn up along with our measurements snf got it installed with the only difference being the ground (sheild) coil is on the inside of the center (Tip) coil. My neighbor wanted to try it this way first...

Recieved matcher today and I will be sending you the freight charge and once again, You've been a big help and I do appreciate it

It will be a big factor in figuring it out and I really appreciate it. Cab fair will be headed your way. Yes I will post my findings for someone else.

Let me know if you got addy.

Make sure paint does not contain any metal particles!!!! I also read some where do not use Black paint. Don't remember why tho. Try Google on that but I painted my Antron with white brush on paint. Didn't interfere with it at all.

You are far too generous sir. I will pay shipping as well and return it to you when I'm finished. Glad there are still people who go beyond the call to help and I will pay it forward.

Yes sir, the so239 will be no problem. Already have one to use. Its just the coil that's holding me up at this point.

http://www.worldwidedx.com/attachment.php?attachmentid=13471&stc=1&d=1403185358 http://www.worldwidedx.com/attachment.php?attachmentid=13472&stc=1&d=1403185638 I was able to upload this for you.

Tried to edit my last message but it would not let me. The same for uploading pics. My housing looks like yours but instead of a "cross" like yours has on top, mine is round with the screw going horizontally into it and the inside looking exactly like yours.

yes

Went back and got the 33 inches

Thanks Marconi for the pics. Yes it looks simple and complicated at the same time. As in, looks like 3 wires from the SO and Im assuming the same 3 go to the radiator of antenna but where does the single [shield side] tie into the 3 wires at to complete the circuit showing the dead short? I...