Search results

An open plate choke or lead somewhere is where I'd look, something on that little parasitic board above the tubes, or look on the supply board for a spot where a diode used to be. Usually they evaporate and you get 0 reading on plate.

People make a big deal about turns ratio and capacitors on these transformers. Yeah they all make a difference but remember you're just making a handshake. If it tunes out it tunes out. You'll notice differences but many combinations will work

Did these not have chimneys?

Anybody have any recommendations for any mail in shops? People that don't have a one-year wait list that do good quality work?

everyone is afraid of antennas with radials. I dunno why.

I find this debate about mosfet finals interesting. Ive got a couple 29s with mosfet swaps they run good, draw slightly less current for the performance. I will say that i never see the watts the shops see. I run at 14 or 15v and my mosfet swaps do 30 ish on a bird 43p. I also have cobras with...

I collect unicorns

Please take my money

If you feel like doing a bit of work i can make a tube swap suggestion. You will need forced air cooling like a pressurized cathode cabinet of some sort and a fan or mini blower., and some ingenuity to clamp the grid to a chassis, and some craftiness for chimneys, u could use a sheet of teflon...

What is wrong with them? I know nothing about the product or it's design.

I always found it interesting that cb amplifiers and their customers want variable power. Except for ldmos amps, ive never seen this on any commercially available amplifiers. People should control the amp with the radio not the other way around.

My biggest complaint about all the brownings, is while they sound good for what they are and they're fun etc I've only ever used the one two and three, and all three of them did not have a very discerning receiver. I could usually hear a couple channels wide and it was really fucking annoying

I wonder if thats the case why people aren't using them on the bowl, or at keydowns, or in hi fi setups... I mean all of those different niches are used to spending money. I mean look it's like owning a classic car, it's cool and it's fun and I'd like to have it but I know that I'd get angry...

Ill give you about tree fiddy for it.

A 50watt 148?? Good lord diamond jim! Id like to see that! Ive never seen one do more than 20 and that was a blown out mess. Mine does 18 and I'm happy

A 1 or a 2 pill. That box will produce 2-2500 pep easily. Use as much drive as it takes to get there. Likely 10% of its output. Probably 100-200 watts

Another option, one i used to do, is use an ac fan. It will be powered by the wall current off the main switch. They will not slow down.

Itll be ok

They are 7812 regulators. The problem is they are being asked to sink alot of power without a heatsink. Remove them. Power the fans from The switch.

What is the issue you are trying to resolve? Does the box run?