Search results

The Trc490 is similiar to a cobra 142gtl and the Sams photofact for this #CB292.Kens electronics has this Photofact and the factory service manual. You can reach Kens at 616-345-4609. or www.kenselctronics.com </p>

Yes they are the same microphones with different names on them.Back in the cb boom days turner did some contract manufacturing for many of the brands available at the time. Ive also seen +2 mics with the Johnson logo on them. </p>

Looks good Chillin! I have the same kind of mag mount and it works good for me too.Gotta love dem 102 whips! </p>

Looks good Chillin! I have the same kind of mag mount and it works good for me too.Gotta love dem 102 whips! </p>

Ive had one for 3 or 4 years now and havent had any problems with it.A pretty tough little meter for the price. </p>

It goes like this..... 1. Audio 2.Common 3.Recieve 4.Ground 5.Transmit Hope this helps!! </p>

It may have been a capacitor that made the popping noise and smoke.I have had that happen on an old RCA tube radio that I have.The paper caps can dry out over time so its not a bad idea to replace em before they short and really cause problems.If you do change em be careful these can give ya one...

Deadkey01 I sent you an email on this......But for anyone else who might need the info.... There is no trimpot in this radio for the modulation adjustment.The mod limiter is D24 next to the large transformer and it can be cut for some "extra" modulation(provided you dont mind the extra TVI that...

It goes inside! Take the screws out of the case and the holder should be there.There is also a jack in the back for a plug to use a output from a wall wart transformer as well. I didnt like the style of 9 volt plug that came with it and replaced it with a rat shack plug and put in a rat shack...

Also a mic element out of an old Johnson radio will work as well and you might want to try this, the elements on these sometime break right in the center where the pin comes through the element try a drop of epoxy and that may solve the problem.Another mic element that will work is an element...

I have one of the Superstar/Landmatic mic testers and have had no problems with it.It is a very handy little device that has jacks on the side for testing noise toys as well. Or you could build your own that can be used with a bench radio.I thought about doing just that but after pricing all...

www.kenselectronics.com If you cant find it elsewhere Ken probably has it.He has lots of parts for radios both old and new and so much more. </p>

Re: Chipswitches Just got my 2510 back and.......This Radio Rocks!! Walks the dog and kicks the cat....... flowers all around! Money well spent! Thanks Docs!!! </p>

Also is it a desk model or a hand mic? </p>

Re: Chipswitches Docs should have mine(2510) done here within the next day or two cant wait to see how she works....... </p>

I would be interested in those manuals please drop me an email at info@flatlandradio.com. </p>

Supposedly they fixed the 1/6 watt resistor problem.However they still dont compare to the late 80s early 90s uniden built models that were made in the Phillipines.After dyanscan sold the brand name off the quality really started slipping as I have been told that they are now made by Maxon.As...

Re: How Many HR-2510/2600 & Lincoln Owners Are There On Ditto on the 2510................... </p>

The cobra 142 gtl is a pretty good radio.I have been using one for years now.And yes it does have the same board as a uniden washington.I have had no complaints from the audio quality on mine. </p>Edited by: <A...

Here are the adjustments for this. AMC-Q302,R312 ALC-RT-402 AMpwr-RT101 TXtune-T401,T402,T403,T406,T407,T408 To turn the clarifier into a slider you cut the black wire on the control and solder it to ground,Then cut the green wire and solder it to pin 3 of IC 601(+8 volts),R303 and 304...