Search results

I'm a Antenna Rotator rebuilder looking to buy rotator cores and controller's, I sell rebuilt antenna rotator's, good working controller's and some part's, Contact me for any thing antenna rotator related,

Any Magnum S-9 expert's out there, I have one that loses vco voltage after it warm's up some, I can use a infrared camera and don't see any hot spot's. I already recapped the radio and replaced TR-51, The radio was doing this before the recap job. Also when i loose VCO voltage, in USB the VCO...

This will be a long post, So here goes, The continuing story on the slow to turn one way Yaesu G-800 antenna rotator. This will be a long story with 4 video's. The 1st video explains why it's doing what it did and here it is,,,,, https://www.youtube.com/shorts/1Lhrz3p32Es Here is the fix. I...

Now this Pace sidetalk 1000B is the 23 channel xtal matrix version. Anyone noticed the discrepancies between the the original Pace 1000M-1000B service manual and the sam's vol 94 and 104? C-247 to C-250 adjustments are listed different in each version in the synthesizer alignment, and each...

I have a 40 channel Pace Sidetalk 1000B(C) with the NDC49913 PLL in it, Very mysterious set up with a separate PLL board. I have the sam's book's for each radio that uses that pll and the closest thing is the Craig L231 that i can figure out, Now what's going on is the PLL isn't locking. I have...

I have a customer with two 142GTL's and i managed to bring one back to life, but the 2nd one is kicking my rear. It has the clarifier unlocked and added channel's using the 11.325 Xtal and cutting the trace at pin 10 of the 8719 pll. It has the PC-385AG board in it. While performing the...

It all started when a friend told me about his cherry TRC-458, He'd has several tech's work on it and he wanted me to swap out all the electrolytic cap's. He said it just DIDN'T seam rite, He though the audio CLIPPED out but it was his call to change the cap's. So i volunteered my services...