• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

Search results

  1. R

    Icom 7300 connection to Ranger 811H Amp

    Thanks for your help. The info I rceived from the cable supplier saaid I just had to plug in the send cable and the alc cable and it would work but it did not.I will keep plugging away with it. Thaanks
  2. R

    Icom 7300 connection to Ranger 811H Amp

    the manual says The maximum signal level of the [SEND] jack is 16 V/0.5 A DC. Use an external unit if your non-Icom linear amplifier requires a control voltage and/or current greater than specified. • The ALC input level must be in the range 0 to –4 V. The transceiver does not accept a...
  3. R

    Icom 7300 connection to Ranger 811H Amp

    I think it is keyed on the PTT line. The manual says 3. CONTROL VOLTAGE is 12 Volts, used for pulling in the TX/RX relay and gives the LED the control condition of the amplifier.
  4. R

    Icom 7300 connection to Ranger 811H Amp

  5. R

    Icom 7300 connection to Ranger 811H Amp

    yes. I have the basic manual but it is of no help at all.
  6. R

    Icom 7300 connection to Ranger 811H Amp

    Ranger 811H 800w HF Linear Amp
  7. R

    Icom 7300 connection to Ranger 811H Amp

    Hi Everyone. New member. I'am Looking for advice on connecting a Icom 7300 to a Ranger 811H Amplifier. I woul be keen to hear from anyone with any advice or has there 2 connected together.
  8. R

    ALC Use

    Hi Everyone. New member. I'am Looking for advice on connecting a Icom 7300 to a Ranger 811H Amplifier.
Top Bottom