• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

Search results

  1. C

    RCI 2995DXCF alignment procedure questions

    Well, I did find different alignment procedures that do make more sense than the manuals. PLL Synthesizer / Oscillator Frequency Alignment: 1. PLL2 - VCO Voltage: A. Set radio to 24.890 MHz, AM RX mode, connect multimeter to TP10. Adjust L14 for 1.0 Vdc ± 0.1. B. Set frequency to 29.699...
  2. C

    RCI 2995DXCF alignment procedure questions

    The reason I brought this up is the fact I’m seeing a carrier on LSB & USB unmodulated. So If I’m reading and seeing things properly “L18” is the culprit most likely. Seeing that the Alignment procedure is not that informative what’s the best approach for setting L18? I don’t want to just Willy...
  3. C

    RCI 2995DXCF alignment procedure questions

    Thanks that’s some great info! The procedures are horrible!!
  4. C

    If you had to pick a 40 SSB CB BASE purely on asthetics what would you choose?

    I like the look of the ARF 2000 but wasn’t a good talker just looked cool.
  5. C

    RCI 2995DXCF alignment procedure questions

    I am looking at the alignment procedure I attached. and have a few questions. I’m only checking and not making any adjustments at this time till I can clarify a few procedures. 6.1.1 PLL Alignment 1) USB & LSB OSC Set radio to USB TX mode. Mod off. Connect Frequency Counter to TP5 (is an...
  6. C

    RANGER RCI 2995DXCF SSB Power issue

    Thanks I will check that, I had the microphone gain all the way down and tried also I will look at VvR7
  7. C

    RANGER RCI 2995DXCF SSB Power issue

    AM is working perfect but on LSB & USB if I have the RF Power more than 25% when I key I’m seeing a full carrier? Receive sounds good on both LSB and USB. Drew
  8. C

    RANGER 2955DXCF strange issue

    My bad fat finger syndrome 2995 is correct.
  9. C

    RANGER 2955DXCF strange issue

    OK this is a strange one, let’s start with it is a bit off frequency on SSB but spot on in AM & FM that’s not the weird issue. when the radio is cold and keyed up at say 10 watts AM I not see a frequency read out on an external counter or scope but when I turn up power to say 30 watts it starts...
  10. C

    Looking for Ranger E-chip

    I have one floating around somewhere I will need to look for it but I’m away till Oct 1st. If you still need it Then let me know I will take $30 shipped or a trade for something? Drew
  11. C

    Brand new 1977 hooker 100 for sale

    Looking at bottom of amp it looks stud mounted
  12. C

    COBRA 2000 GLT SQUELCH POT REPLACEMENT

    Great thanks, I actually had that in my cart. Appreciate it!
  13. C

    COBRA 2000 GLT SQUELCH POT REPLACEMENT

    Anyone know a part number and where I can get a replacement squelch potentiometer? Drew
  14. C

    COBRA 2000 GTL well I thought I was moving along?

    well D52 was NO GOOD, replaced with one from a spare chassis and it’s now working just need to align frequency counter to radio frequency now
  15. C

    COBRA 2000 GTL well I thought I was moving along?

    Correct
  16. C

    COBRA 2000 GTL well I thought I was moving along?

    So I removed the channel mod and Roger beep, good news is radio works kind of. Not So good news: Set up 1) voice locks centered no modulation. 2) Frequency Counter and Oscilloscope 3) Dummy load and watt meter. Seeing: 1) CH1 RX radio frequency counter 26.9654, TX 26.9462 2) CH40 RX radio...
  17. C

    PLL Question

    yup the trace is cut! Will try to get it jumped later, time to go drink a few cold ones!
  18. C

    PLL Question

    That board was hooked to the mic jack so I’m guessing it’s some type of audio mod.
  19. C

    PLL Question

    It was modded for extra channels but I took the mod out and I’m getting weird frequencies now. this is the board that was removed.
  20. C

    PLL Question

    If a Cobra 2000 GTL has a MB8719 would it work as a stock no channel mod radio?
Top Bottom