Search results

Well, since these other Gentlemen have the Ham gear and the 10 meter rigs covered, I'll suggest some 11 Meter rigs that work well and are affordable(At least less the the ham rigs).Cobra 2000GTL. If you want a Base this is a good one. I own one and I logged a QSO with a gent named 505N.London...

Standard: 1-audio 2-receive 3-transmit 4-n/c 5-shield 6-n/c Okay, the DM452; 1-white 2-Red. 3-Blue 4- n/c 5-Shield and yellow 6.n/c

Update!: Got the Capacitor Kit today and started changing them out. Got eleven done before my eyes decided to take a break. I'm gonna work on it again after supper Robb, I'll try with the variable again.

8113, dumb question but, have you tried a new 9volt battery in the D104?

Retro, go here. You might be surprised. https://www.facebook.com/groups/browning.tram.sonar/

Just found another site that says they were in Santa Fe California ,run by a guy named Faust Gonset.

Nope, know for a fact they were Australian sir. I pulled that data from an old employee on the net. According to him they were in Sidney. Of course, that info is only as reliable as the internet.

SBE(SideBand Engineering) was an Aussie firm. Console VI was the last radio they made, only made 1,000 of them of which about 500 were exported to the States. It'll run about $600.00 for a working model based on what I've gleaned from collectors. As an aside, one of the desk micswent for about...

ET, E-mail me your Address, davewwaits@live.com

I just keep buying other people's junk it seems like. Try to do something straight-forward(Well, at least it should be) and the stuff just dies.

ET, you'd do that? How much? Don't expect it free Brother.

Well, removed the two jumpers, wouldn't xmit. Tweeked L19 a 1/4 turn each way, lost keying circuit. Receive light now stays on when you key the mic. L19 at its' original spot(Made a small witness mark). No, I didn't mark the slug, used a side the of screw slot as a mark. Then I put the jumps...

There's a cut trace up by VR10 that I'm gonna utilize for modulation trick, and one at Pin 13 of the 8719 that I repaired(He was supposed to cut the trace at pin 14, I think he missed

Thank You ET! Now all I have to do is see that pic of the unmolested board. I checked the jumper at the Xtal last night, no cut trace although it crosses over one. The two side by side jumps are to fix a bad spot in the board. Somebody tried to remove a 945 and tore the trace pads on two legs so...

Better pics of a couple spots.

I'll have to get some simple green ET, I tried cleaning with a toothbrush and Alcohol but it didn't do much.

Okay, here they come.

I'll take some pics right now ET.

GOD YES!!! Pics of the solder side would be a godsend!!

Yes, I have a decent level of receive.