Search results

My big question is all the soldering you have to do for both the channel and fc done on one side of the board or are they soldered on both sides.

Come on guys I know somebody has done this before....

How hard is it to change the FC and channel leds to the blue ones on a Galaxy 959 radio. I have a set coming and just wanting to know what im getting into here and any tips would be very helpful.

Well all I do know for sure is that it is working great now that I added the low pass filter in between the radio and amp. Swr's are great now and it's puttin out the swing. Thanks guys for all your insight to this problem 73'ssss to you all. I do Have a like new Rm Italy KL-60 I would let go...

Yes radio is new out of the box.Don't think it's out of tune much if any. I am using a 3' jumper from radio to low pass filter then a 3' jumper from filter to amp then a 3' jumper from amp to dosy meter.

My radio is a Galaxy dx959 and no limiters have been clipped. I just turned up the modulation vr16 and set the hi and low power. I don't clip modulation limiters in my radios that is just crazy. I have gotton radio checks now with my setup and all say im loud with very clean modulation. 73'ssssss

Ok guys I got this figured out and fixed. I added my Low Pass Filter inline right after the radio and before the amp and the swr went down to 1.1 on the radio meter and Im getting much more swing out of radio and the amp now. On high side im dead keying 1 1/2 watts and swinging to 180 watts now...

My dosy meter and themeter read the same swr if i remove the amp out of line radio to meter. I will try the coax length thing. I now have a 3' jumper from radio to amp the a 3' jumper from amp to dosy meter.

Ok my swr on radio is showing 2.4 swr and on my dosy watt meter is shows a 1.2 swr. I have it hooked up Radio-amp-dosy meter-antenna.

Also forgot to mention the radio will dead key 2w and swing to 30w but when I put the amp inline between the watt meter and radio it will only swing to about 20w. I don't know what the deal is here.

My swr also shoots up to a 3 when I turn the amp on and it's a 1.5 with it off and it's a 1.0 with just radio going to watt meter. Im getting around 140-150 watts max on high power. Is there something wrong with this amp or what.I know when I turn it on the swr shoots up to a 3 and the swr alert...

Hello, I just purchased a new Palomar Elite 250 amp and thought it was suppose to have the sd1446 transistors in it but mine has the 2SC2290 transistors. Is this better for me or worse. I can only get about 140 watts out of it on high power pushing it with a galaxy dx959 peaked and tuned dead...

Does the IRF520N Mosfet transistor need a mica insulator or can it be mounted directly to the back without?

So if i use a mica insulator as you suggest what about the steel screw they used to mount it that would cause it to ground should i use like a plastic screw and nut so it wont ground to the back. Why would uniden just put it in there like that with no mica insulator and a steel screw to bolt it...

Hello, I am new to this forum and have been reading and learning tons here. My question is this. I have one of the new Uniden 980 ssb radios and loved it till the crappy RD16HHF1 transistor went south. When I was removing the transistor I noticed it was just mounted right on the back of radio...