Search results

Here's a pic I took today. I have the CB mounted on the passenger side of the center console. My friend with a 96 ZJ has his in the same spot. Same radio too. The Uniden Pro510XL is a small radio, fortunately! I have a Firestick molded body mount (probably should have went with the...

Thanks and thanks for the links! BTW you have a 97 ZJ? I have a 95 XJ.....7" on 33's....

Got the Realistic mic wired up to the Uniden plug and working correctly! Their information regarding how Cobra mics had the mic audio and common mismatched. Cobra mics work on my CB so I just wired it up like that. The receive and transmit wires were correct though. At least it works!

I think I have the correct information here now, thanks to your links. For the RadioShack/Realistic mic, it appears the blue wire is just there for kicks and is not used. White is the mic audio, black is receive, red is transmit, and then you have the shield. From the solder side of the...

Thanks, I'll take a look at your links in a bit. I was able to borrow a mic to use for last night's event so all was well. I did some searching the night before and it was really confusing because different websites listed different wire colors for the same radio and mic...

FYI, the wires with the Realistic microphone are white wrapped with an insulator/isolator, red, black, and blue. The wires with the Uniden microphone are blue wrapped with an insulator/isolator, grey, and brown. The Uniden plug is marked 1, 2, 3, and 4. If anybody could point me in the...

Hi there. The microphone that worked with my Uniden Pro510XL CB radio recently quit working. The microphone that quit working as well as the radio connection are a 4 pin setup. I have a Realistic (Radio Shack) microphone here that is a 5 pin setup. I snipped the ends off of both radios...