Search results

while I did read quite a bit before choosing the wrong xformer, I suspect that I was led astray by reviews and confusion with audio amplifier output. Is this one more appropriate?? http://cinemag.biz/mic_output/PDF/CM-2480.pdf

so here's what we have mic->preamp-->eq->fx->box->radio mic jack box has 6 pin plug to radio, PTT, up/down switches and input from fx. I picked up a audio xformer from radio shack has 2 wires on one side and 3 wires on the other. 2 wire side shows 1 ohm, 3 wire side shows Center Tap -> red...

In the last 2 days I have received unsolicited complements on the audio on my radio. One from a needle bender in CA yesterday and a station from Germany today. The German station was operating a Kenwood base unit. rci-2970n2 are in short supply but should be available in a few months. They are...

want to give one of these a try?? http://rbmicro.com/ http://www.kenselectronics.com/lists/micpart.htm www.ebay.com/itm/W2ENY-HiFi-kit-replacement-element-for-Astatic-D-104-/231232757301

and you can talk all over the world

http://www.worldwidedx.com/threads/vr-adjustments-and-mic-wiring-code.48123/

from copper forum Tomahawk and Sidewinder 400 Standard: 1-audio 2-receive 3-transmit 4-n/c 5-shield 6-n/c Astatic: 1-white 2-black 3-red 4-n/c 5-shield/blue 6-n/c clip yellow wire Turner: 1-white 2-black 3-blue 4-n/c 5-shield/red 6-n/c clip yellow wire Sadelta...

jess you adjust the antenna, not the radio for swr. trying to find a pic of the radio so I can see what you have but not having much luck find the swr / Cal switch and set for calibrate. key the mic and turn swr calibrate until it's @ 100%/SET marker. reset the first switch to swr and key the...

how did you attach the mic to the boom??

10-11-12 I have the optima mk3 and ranger 2970N2 mk3 275usd 2970N2 450usd

pmed

Moving the jumper is like changing the bus address of a computer disk drive. A pair of tweezers is all you need. It will take longer to unscrew the cover that switch the jumper.

my mk3 came with the jumper already in place for 11 meter coverage

I have a virgin grant xl I'll forward a pic of the solder side tomorrow if that would help. Camera is out at the shop right now

Yes to the DI mod, That is the one EASTSIDE is using in this thread. http://www.worldwidedx.com/threads/anyone-using-rack-gear-and-a-studio-mic-with-there-radio.175424/page-2#post-498287

i picked up Irish Rover 187 a number of times Nice contact,!!(y)

they are, you can make an adjustment, sweep a frequency range and store it. do this many times then down load the data to the PC program to view the results in far greater detail than the small screen. http://www.worldwidedx.com/attachments/mox-b-swr-jpg.14349/

start about 58:20

YAMAHA GQ1031C Single Channel 1/3-Octave Graphic Equalizer, I have of of these if you want it cheap