Search results

thanks will do. i'm going to truck sunday and hook radio up to my pick up for power and just use antenna on big truck and see what happens. i'm just tried of all the noise all the time if you know what i mean. i have brought cobra's galaxy connex and general lee. and had the same problem. i...

DON'T HAVE A INVERT. don't run truck execpt to go from point a to b. company has a heater and cooling system setup in truck for comfort. heater when use, only uses 1 gal. per 24 hrs use. the same noise is in another truck of the same type to. maybe it may be me, because i had cb's in the...

right now running cobra 29 with noise cancelling mic. with k40 antenna. also on the coax you have the inner and outer cable. outer is ground. why is it when you screw that on to a mirror mount and then place that plastic washer on top of mounting hole so mount stud does not ground out. but my...

start out with. over 7 diffent cb's, 3 new antennas,4 new mounts and 2 18' coax. 4- new plastic washers on mount to. the problem was with everything i try above. meter runs only at about 1-2 lbs at all times. i get static noise all the time. i can transimit just fine but recice is only good at...

just notice these galaxy 45 radios. are these any good for a trucker radio. or would i be wasting my money. just looking for echo,talkback and a radio that will talk good. i just use channel 19 to. any comments would be helpful. thanks

in back of radio vr12,vr10,vr9,vr13,vr17.

oh i'm use to people like that. been driving otr 28 yrs dealing with them kind every day

what can i do to a 979 just for a basic tune up. i cann't find anything on the 979. 959 is loaded with mods.

just wanting to see what you all think about the stryker or the northpoint 9. was thinking of buying one but want feedback on them. and which one would be better then other.

thank you

hooking up a patriot on my wooden shed which sits on concret. i going to use a wall mount with a 1 1/4" mast. but was wordering about ground for antenna. if i need ground or not.

THANKS IT WORKS

it says to cut the circuit board trace to the leg of external speaker jack. what is the trace to the leg. is it the dark green area or light green area around the leg.

have a galxay echo board that is 8 volt. where in a cobra 29 can i find 8 volt on the transmit. so i can solder wire to. its the old echo board. if a resitor is needed what kind or size to use. thanks al

also a blue bulb for meter.

does anybody know where i could pick up the display led's for a galaxy 959. frequency display not channel display. besides ebay. or if anybody has the measurements of them. thanks allen

does anybody know where i could get a new volume/sq control pot at.

thanks

can you put a erf 2030 kit into these radios. if so does anybody know where i can get instructions to install the kit.

is a galaxy 959 and cobra 29 wired the same. if not do you know the wireing diagragh for galaxy 959