• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

Search results

  1. E

    Carl Built

    If Carl and Rooster came to the agreement that Carl would no longer sell to the public...That would be smart business sense....Capitolism at it's finest...lol
  2. E

    Carl Built

    I saw that also???? Weird????
  3. E

    Carl Built

    Mine was in stock. Just shipping time.
  4. E

    Carl Built

    My 4 pill is also screwed on with 8/32 machine srews
  5. E

    Tech Special - Blown Late Model HG Texas Star 500V

    Yes... My bad....
  6. E

    Tech Special - Blown Late Model HG Texas Star 500V

  7. E

    Tech Special - Blown Late Model HG Texas Star 500V

    You have a PM
  8. E

    Carl Built

    I changed my power wires to #4 cable. So I to ditch the small bead also. I prefer to have a choke with a loop. So I have a ton of these large 43 mix beads. I was able to get 2 pass thru my bead on the outside the of cabinet. 31 mix would be better but I do not have any. I plan on buying some...
  9. E

    Better than average SSB radio

    Sounds like a plan! 73's Unit 406...Cleveland ,Ohio
  10. E

    Better than average SSB radio

    Yes, Mike at Scotts radios
  11. E

    Better than average SSB radio

    I went with the President Mckinley. Could not be any happier. Thanks Scotts radios
  12. E

    Mic Upgrade for a President Mckinley

    Ok good deal... 73's
  13. E

    Carl Built

    Do you have anything extra in line (ie filters,tuners) if so; I would remove them until you figure out where the problem lies. I would invest into an adequate dummy load. What happens when you plug the antenna coax directly into the back of the amp? Does it still hang up? I hope you get this...
  14. E

    Mic Upgrade for a President Mckinley

    I have one that I no longer use(P6 type). I purchased with my President Mclinley.
  15. E

    ANYTONE AT-5555N2 receive noise work-around

    Interesting thread. I will have to check mine when I get home. Funny...I never run my RFG control at 100%. My sits between 12:00-3:00 o'clock. My serial # ends with 80034. Update... My receive is just fine. A little white noise no static and my RFG control is nice and linear.
  16. E

    How to tell the difference between Maco Alpha V5/8 & V5000?

    Fyi...You are replying to post from 2010
  17. E

    Carl Built

    If Carl says it's ok. Who am I to disagree. Good luck with your amp. 73's. Unit 406 from Cleve,Ohio. Hope to hear you soon in DX land. Lsb ch 36-38.
  18. E

    Carl Built

    I have the 400hd. I replaced my wires with #4 awg and installed twist welding connectors. I would not splice the wires. Install some Anderson power connectors. A At-5555n ii may be a little too hot for this amp. the recommended power input for this amp is 40 watts peak power. His amp is class B...
  19. E

    Carl Built

    I heard a simular story from someone else with the AT-5555. My input match is 1.2 until I get to the very edge of the band with my antenna.
  20. E

    Carl Built

    I run the 400hd( as a base amp) on a 100 amp power supply (3x) 6 volt server supplies each set to 4.83 =14.5vdc @100 amps. My supply dips to 14.4 when I transmit on SSB. I run the Anytone At-5555n ii on a seperate 50 amp switcher supply @ 14.3 volts. Most of my DX is done on SSB but I get great...
Top Bottom