Search results

I have a new neighbor that moved in this summer about 4 houses from me. There is a strong marijuana smell and now I have a constant 5 s-units noise level. I am not sure yet of grow light schedule . Is there anything I can buy to help with this problem??? I now cannot talk to some of the locals...

Another picture of side of Apollo 500. Sorry for the bad picture but shows you a general size compared to Cherokee CBS2100 radio in background.

Here is a picture of Apollo 500 I have . Has 6 tubes .

The Apollo 500 I have is not the one on cb tricks I had one of those types also at one time. This is a 6 tube and design completely different. I just cannot put a picture on here for some reason so you could see real amp. When I go to pictures just has a insert photo and nothing else?? The amp...

I picked up a Apollo 500 amplifier at the MIS hamfest it is in great condition and works perfectly. It is a 6 tube amplifier that has 6lf6 tubes in it. I cannot find any information anywhere about this amplifier has anyone seen or heard of this model amplifier?? I tried to unload picture but...

Thank you nomadradio I did get on utube and see the selector apart. On my 201a the channels 31-35 were the ones I would have to tap selector for them to work. It may not have been a good idea but I took off selector back and sprayed some WD40 in there to help clean and lube inside. Now it is...

I just picked up a 201a is there anyway the channel selector can be fixed or possibly taken partly apart to spray some contact cleaner inside. Mine is acting up on channels 31 to 35. As many 201a out there seems like someone could come up with a fix???. Thanks

I just picked up a 201a is there anyway the channel selector can be fixed or possibly taken partly apart to spray some contact cleaner inside. Mine is acting up on channels 31 to 35. As many 201a out there seems like someone could come up with a fix???. Thanks

I do not believe for a minute it will blow up I have about 20 old tube amplifiers and almost all have sweep tubes in them. This 350z will work just fine like all the rest do with a little drive put to it and tuned properly. They do not make the sweep tubes anymore but with a good set in a amp...

I picked a 350z up this summer mine does 300 pep on low and 500 pep on high with a 2-12 pep radio. I did not remember what dead key of amp was. I am going to dig it back out and drive it with a JB150 and see what it will do.

Thank you all for your advice and comments I picked up two of the 4-400b tubes at the Monroe Michigan hamfest I have 40 dollars in them and they are in boxes I will put them on shelf for now . Thanks

I was told today at a hamfest that you can replace 3-500z tubes with 4-400b tubes and it is plug and play in other words I do not have to do anything to the SB220 is this true??? I know the 4-400b tubes around here are easier to find used. Thanks Jimbo

Black Cat--Seeker or Wawasee all same amps basically. I have about 5 or 6 of these. They will increase modulation so do not use them with a power mike or mic gain turned up too much because it will cause a squeal, fuzziness or over modulation they increase modulation themselves. Also do not use...

Nomadradio I completely unpluged all connectors at mic board and TX still on . I guess CPU problem really too bad it was such a nice radio and looked like new. Thank You All so much.

Sonoma I have some basic electrical knowledge but not sure enough to repair radio without knowing exactly what to replace. The mic plug area has a small board but no diodes on it just disc capacitors. I am looking for print. Board is marked ept295013z. Yeti Communications I agree with you also...

It will transmit and receive. By turning power on and off and holding down shift button and up down I can change channel slowly. I believe it has something to do with TX light on all the time. I think radio somehow thinks it is in a TX mode and then channel selectors will not work. Could a...

Radio does transmit and receive I unplugged plug in from mic board no change still shows TX in right hand part of screen. I found out that I can get buttons to change screen if I hold that button down and turn power off then on. What I mean is if I want to shift I hold down shift button turn...

I have not done any mods to radio and it is stock far as I know. Replaced rotary channel selector a few months back.The TX is lit all the time.

My 22b is stuck on channel 17 none of the buttons that effect channel change will work and channel selector does not change it either It is transmitting and receiving. The tx sign is also on in corner. This radio looks like a 2950 button type but a base. Any help please.

Beetle I tightened up 4 bolts holding laminations also did not make a difference. When I run amp on low less hum than with amp on hi. Thanks Jimbo