Search results

Will the swing modification work for the 6666Pro ? I don't know if the 6666 v3 has the same board as the 6666Pro.. Any help would be very much appreciated.

On menu item 19 and 20 , set both to 000000 . Go from there on what you want it set to.

I have just received the Anytone 6666Pro. It performs just as they had said and better . 105 watts max on am and ssb, Now here is my question. I noticed on am there is very little swing maybe 2 watts at best. Is there a way to get this radio to swing from for (example 2 watts to full power )...

One last question. Did you try going to 39.0000 lsb and 37.0000 usb ?? Sometimes that is what they are doing as well

I was referencing the cobra 2000 and the dx 2547 radios. On the Lincoln I have no experience with that radio. Since it will tune to 38.0000 and you still can not tune them in on that frequency or on usb or lsb I have no clue to why you could not tune them in with the Lincoln.

Forgive my typo on spelling. I am replying on my iPhone and AI thought it knew what I was spelling. Lol.

You have a good radio but it’s not made to go to frequencies on tuning like the RCI dx series radios or like the ham radios It has been my experience that this is usually why you can’t seem to clarify people. I have found the using usb and lsb on I between channels in your case 38.0000...

He could had been on 38.0000. Further than your clarifier can go.

What does noir masse mean? I think noir means black but I do not know what masse means.

My at-5555nii will be in on Monday. I need to find a copy of the owner's manual to download so I can see what the mic wiring diagram is. I have been unable to find info on the net. Does anyone know the mic wiring diagram for the at-5555nii?

I just got your post about this mod is on the board and you cut the white wire and move the jumper pin over. Thank you and disregard my last post since it is not the one that works. Thank you Merry Christmas and God Bless you all.

One other thing I found is if this is not on the board they say while the radio is off press and hold the FUNCTION button with the EMG while turning on the radio. You will see on the display band 1 rotate the channel till you see band 2. They say hold the function button for several...

Some are saying that you take off the the cover of the radio and there is a white wire looped that you cut and next to that wire is a jumper pin that you move that pin over Then turn on your radio. Remember to not have any power on until your done. I do not know for sure if this is right...

I had ordered an AT-5555nii and I forgot to order the program cable. I have other program cables, and I am wondering if they might work. I have a ss7900v turbo program cable, an Antyone d578uv program cable. Does anyone know if either of these cables will work on the at-5555nii? The reason I am...

On the CRT SS9900 I noticed on the software it has the RSSI settings. I am wondering in case the meter needs adjustment will the software program the RSSI meter settings to the radio? I had one CRT radio that the receive and TX meter were way off and not accurate. I do not want to adjust...

I forgot to say I am also using a 50 ohm dummy load at the meter

I am using a Dosy TC-4001 meter On the Dosy meter showing 35 to 40 on am/fm/ssb PEP on THE RADIO METER AM =70 FM =50 SSB = 40 to 45 I plan on getting a signal generator. By the way Thank you for the help and advice.

I know this is a different subject. But to adjust the am ssb fm power on the crt ss 7900v turbo do you need a signal generator? My radio from factory is showing 35 to 40 watts out with an external meter. Not the 60 that people are saying. Back in the old days we would just audio into the mic...

Crt has updated the CRT SS 7900v turbo version 2 latest models' software to match all the bands the new version has. This was done about a week ago. Go to BELLS CB RADIO SITE and download the latest software there. Thank you, CRT.

Here is an update on my last post and what I had learned. The band button is only disabled when the radio is in MEMORY MODE. to get the band button to work all that has to be done is push quickly the memory button. This will put the radio out of MEMORY and back to the band's selection. This was...