Search results

[FONT="Comic JGAR - PISTOL (VERTICAL) ANTENNA Price: $189.00 is what you pay today for this antenna. Purchased it 8 years ago and put it together and could not figure how to set it up (kamma Bar) so i took it apart and has been stored in my garage since then. It is very well made with...

This is the same one he is selling but the lettering was not all there but thanks for the web site ....

No i'mot a electonic tech but have worked with electonic process control instrumentation and that is about as much as i know about power (p=IxE) and only knowing for sure that the power was stated at 300watts and I knew the voltage applied then applying these two variables ......i would know...

I guess what your telling me that if i apply the power formula ...it would only tell the amps that it would generate at the full wattage? but I can find no reason to use this...I guess? Thanks for all the info

big 10-4 on what the model said about the 300 guy and thanks again for the info and its not worth the 90 bucks and even thou its a solid state amp. Since it falls into the class c amp of palomar cobra etc and again WWDX thanks for the answers i have recieved

Just found a mobile 300 watt Black Cat amplifer at a local flea market ???/I know it could be fried but just curious if anyone has any info on this unit? Have searched hi and lo and nothing but a JBM name and they are really hi dollar units..Back to the person who is selling it and he is our...

what would you sell your palomar 300A for ? would it just hook up to a yaesu ft 747 used as a base station with the HD yaesu power supply? Just curious and would it really splatter or does it have the ab bias circuit?thanks and just wishful Xmas shopping Oil2Gas

Yes Sir I did find a new CB shop....Its Morgans Electronic out of HOuston in a little town on hiway 59 . I send via ups and he did the following to my Galaxy DX 66 V: 1. Alingned the radio 2. Ajusted the VCO voltage 3. Set the minimum @ 4 watts with 30 watt swing 4. Set the maximun @ 10...

Guys I am not a repairman or a electronic engineer but I found this shop about 50 milles southwest of Houston on US 59 on your way to Laredo Tx all points to Mexico. He is a whiz with the Galaxys and he is very easy on your wallet . The problem is that he is in the old downtown area one mile off...

Thanks for answer but i also have a question for you? I have a galaxy dx66v and its being worked over and it will hook up to a yasesu FL 110 amplifier. The amp is meant to only have a 10/15 watt input and output will be around 100/150 watts. If i understood what you said that if i have a good...

Yur correct also in that i was trying to go old school more like a conversation piece..but something good clear and loud. Today i did call the shop and will take his 66 back due it being very bad output and it has a three month warranty . My second option is for him to check it and its supposd...

I have seen others make remarks about the slow relay and something with the relay and this unit has has a slow and fast relay switch? I noticed that on the hookup drawings it shows that it can be keyed manually or automatically. This is where you say i should use a accessory relay from a...

:confused1:I only come here when i have problems or trying to buy something and the most inportant is finding infromation on diff topics.. and from diff folks than my cb shop Thanks for sharing all your expertise Well here is my problem: I puchased a Yaesu Fl 110 amp and it has a MAX of 10/15...

Have looked everywhere and thru some friends at theri ham stores and no luck yet but another gentleman gave me a good suggestion about just soldering a wire to the proper pins and then heat wrap them and away we go . will use it with my browing LTD moble on my japaneze pick up ...Worked 20 years...

Sorry it took so long to answer but had should surgery , have taken it to a tech and he will try to do what your saying is to solder a wire to pos and neg and do the jumpers i guess and tgry it from there. The info i got ws that it only took 10/15 watt max input to get a goodl clean 100 watt...

just purchased this amp and need a power cord to get my dc volts to it . Its a 6 pin connector on rear of amp . Apprciate any help and if you know of a good radio tech in the houston area? Let me know his nphone number please Is This Country Great or What

thanks and do you know the name or model for this remote connector? is it a connector that ties into the 6 pin type connector on the right rear of amp? I guess the plusand neg dc volts tie in thru here and one of the other pins will allow the transmitt and receive relay? again Gentlemen thanks...

Thats what i get for trying to impress someone and it bit me in the butt but thanks for the info and will not repeat again and quit quoteing from the many bits of info from the al gore net. Any who i thought they had made yaesu quit manufactureing that one amp was due it being able to use on 11...

I just purchased a yaesu Fl 110 amp and i need help in trying to hook up to my Browing LTD mobile w/extra channels. I need to kinow if i need a special hook or is it me finding the correct 13.8 plus and neg on the amp? and the receive and transmit relay should be rf sensitive and not need to...

Guys again I'm here looking to find two items that I need for my p/u......First item is made by Yaesu and its a FL-110 Amplifier that is a 12 vdc powered and output is about 100 watts with a 10 watt input. If yu have one that you would like to sell ....please contact me and tell me what your...