You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
If you want for 1/2 of the price new, here you go , the Devant 1 ( maybe an older version of the Devant Special) :
https://www.ebay.com/itm/135732008807?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5336136228&customid=&toolid=10001&mkevt=1
As long as the X be 4 or less ( SWR can be around 1.4 ) antenna is resonant. That means the ohms is not around 50. Sometimes achieving a 50 ohms and X less than 4 is not possible for a number of reasons.
I had one and it is not an “ easy to deal”antenna. It is looooong and picky when trying to tune it. I had it 15 feet above a rebar reinforced concrete roof. Had the coax cable attached to a galvanized pipe with zip ties. I had no less than 2.0 SWR. I played with the game and the bone with no...
Anyway, I e-mailed X-Force and requested if the sell the voltage remote control for this motor maul. I hope they reply to my e-mail.
By the way 9C1Driver, I also contacted DaveMade. I am waiting for their response.
Yes it is.
I can manufacture it, but I need to know if there is anything else needed inside the remote (besides the voltmeter and the potentiometer). I need the potentiometer value in ohms which I believe should be the same as the potentiometer at the front.
Is there anywhere I can find that...
Hi. I bought a used 200 amps X-Force Motor MaulIt came without the remote. This motor maul has a 1/4” female connector on the back for the remote to control voltage remotely
I am looking for a wired remote control unit with an integrated volt meter. Does anyone know where to buy it? .
Remember, by that time, 11 meter Ringo Ranger was available as well as the 10 meter version. If there is any difference between these two antennas, I honestly don't know because I've never had either of them.
Short answer, no it is not a perfect match. Like @hotrod said: try to keep my reactance or X as low as possible ( below 4 ),even if it slightly raises swr and they to get impedance or R as close to 50 ohms as possible.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.