Search results

Ok thank you..

Hi nok so in tried this with a 3.7 battery back from a wireless phone and a 9 v battery.. Dosent seem to make a difference.. Neg is soldered to the ground at the edge of the pcb where bit mounts to the chassis.. And the positive at D74 as indicated in the diagram drilled a mini hole in the...

The at 3500 8 pin.. Pin 8 white Pin 7 shield/blue Pin 6 red Black & yellow no connection

Guess I will see.. Made a couple adjustments.. Might change a couple caps.. I replaced the power cable to a heavier gage.. Have it swinging nice.. Good clear punchy audio... Nice receive.. But haven't use it long term yet.. I'll see how it works out.. Download the service manual.. To go...

Thank You

Hi all figured out my power problem adding a condenser to this mic. Ast878dm.. Can't run it directly off the battery even though nits a ground switch.. The circuit won't shut down after you key up hence killing the battery nin a week.. Need to solder the positive lead feeding power...

Hi all.. I just Aquired a clear channel Ranger AR-3500 30 watt ver. went through the alignment all is great but.. Trying bto find how/where I can hook up a battery backup to hold my programed channels/frequencys so as not to lose them every time I turn off the power supply.. Thank you..

Hi ball the ptt are used I trod a couple different things ground switch using a small relay either dosent work or messes up ghee switching very strange Woimdering about a small Toggle inside the mic under the ptt switch..

Hi all question.. I have an astatic 302 ast878dm.. Is there a way to put a condenser element in this? The original electric is dead amp is OK.. Can't seem to find a way to swith the power on to the condenser without it messing with the switching.. Direct power to the battery keeps the...

Yes I have the relay assembly and cable.. Though my dad had the antena in the garage attic but no.. I can get the aluminum I need from a local supplier.. My buddy can 3d print the insulated mountings.. This will be a fun prodject

Thank You..

Hi all looking for info on a super scanner antenna. I have a controller but nothing else but the main mast mount looking info/measurements for this anntanna or if anyone happens to have one for sale Thank You

Thould get me in the right areas.. Thank You for your help

Thank You mine was built July 77.. Just got the cap kit along with some audio caps and diods to do the audio mods if needed.. Thank You

.

I'm retired

Thank You.. Appreciate it

Hi all I received a trc457 totally virgin.. Had bad audio clipping problem. Stopped transmitting. Replaced the 2.2 tantalum with a electric 50v.. Audio still clipping/ beinf limited around 35 to 40% with a stock Mic.. D104 or plus3b.. Ant suggestions how to get it higher? Thank You

Hi all I dug up my old tram D62 my first 40 channel radio.. Last I used it back in the 80s had a ssk on it and it stopped transmitting recieve I'd great.. Put in new finals still no TX anyone have any suggestions on ehatbit could be? Also looking for a schematic for. It. It's...

https://www.amazon.com/dp/B07V4RJS64?tag=worradfor-20 That or rigit cable. That's like working with plumbing. Usuly used for repeaters.