Search results

Would anyone have a service manual or the tuneup/alignment procedures for the Lafayette Telstat ssb 140 thanks

Looking for a service manual for a Lafayette ssb Telstat 140 thanks

I did find all the specs I need for the xtals in the cybernet pll02a chassis. Waiting until xtal company opens in china to contact them

Dont think there is a way to measure the specs I need I can read the frequency on my xtal tester but not the specs the xtal was cut with

Im looking for the specs on the 10.0525 xtal as i explained so I can then have the 10.165 and the 9.940 xtals made. At 1 point about 4 years ago I had 14,000 xtals made for all my channel kits I make and sell. Been getting calls for the pllo2a kits which i have boards made I use on other radios...

I have a company in China for all my crystal needs I just need the specs for the 10.0525 xtal used in the chassis and then will have the 10.165 and 9.940 xtal cut. I did this for the mb8719/8734 chassis had all the hi/lo xtals made and was able to get the specs for those but nothing out there...

Anyone in this forum know about the specs on the crystals used in the cybernet chassis like the GE super base or the Colt Excalibur or the midland 78-999 radios the 10.0525 crystal used in these radios. Im looking for the specs to have some crystals made and need the l know its doubled in the...

On the GE Superbase and the Colt Excalibur and the Midland 78.999 ssb radios and most other 02A ssb radios im looking for some xtal information. the stock is 10.0525 regular 40 the high 40 is10.165 the low 40 is 9.940. If i was to have some crystals made what would be the specs for the crystal...

Thank for posting the info I asked for and yes on only doing 1 mode at a time. Im going to use mostly for Am but wanted the #s for ssb option. Happy 4th to all

Thanks Nomad just wanted to try one I ordered 2 a red and a green. What might be the ssb upper and lower offsets i had that info before but cant find it now.

Another question on this counter. what would be the off set if any for AM and upper and lower sideband for the cb band? I know you can only have 1 set for these counters at a time

Thanks for posting!

Would anyone have a model# or a pdf manual for this counter pictured? thanks

Thanks for all the info on setting the off sets will try in a few days after i get a response from the Chinese i got the bad display from

I did make a claim with Paypal and also with Aliexpress in progress. Thing that sucks is a waste of 2 weeks and if I want another gonna be another 2 weeks. Yes their packaging sucks putting that is a plastic bag and the case it was in is like glass it shattered. If it was shatter proof would of...

So I got the OLED counters and 1 was damaged. Those Chinese suck for packaging using a plastic bag to ship it in all the ways from China to USA. Filed with paypal and sent to the Chinese company the pictures. So now I have one in hand for now.

So further testing is that TP3 or R17 on the cobra 29ltd/gtl is the receive 16.270 ch1 and 16.710 ch 40 minus the 10.695. I was thinking about a small relay controlled by the pin 3 keyup pin on the Cobra 29s/25s/ most 4 pin radios. I did not see in the directions on how to set the off set as...

Just wanted to try one in a 29 as I sell a lot of channel kits for these radios and would be great for the 80 extra channels so no channel chart is needed.

I have 2 of these on the way this week and was hoping to put in a cobra 29ltd/gtl Am radio with 80 extra channels. I found a transmit location to monitor transmit but cant find a location for the AM receive I know about the 455Khz down shift in transmit. If there is a spot could someone chime in...

Did you use TP 1 for the madison?