• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. I

    Intersting way to do MaxMod to SR94HPC

    And it doesn't even give it more mod. The limiter keeps even the And it doesn't even give the radio more modulation. The limiter keeps the radio from doing even close to 100% mod. You have to do a real modification like I did to make the radio perform better. There is a reason why the audio...
  2. I

    Stryker sr94hpc

    My SR84HPC Stryker now performs better than all my other radios after the real modulation modification.
  3. I

    Anytone 5555n

    Does anyone know what OP2 that is located next to OP1 does? It's next to the expansion mod connection.
  4. I

    Anytone 5555n

  5. I

    Anytone 5555n overactive ALC

    These files on cbtricks are for the at-5555. not the at-5555n.
  6. I

    Anytone 5555n overactive ALC

    http://www.cbtricks.com/radios/anytone/at_5555/index.htm
  7. I

    Anytone AT-5555n Service Manual.

    Does anyone know how to disable Modulation limiter on the Anytone AT-5555N?
  8. I

    Anytone AT-5555n Service Manual.

    Hope this helps.
  9. I

    Stryker sr94hpc

    I connected the stryker sr94hpc to my diy 450watt dummy load (with built in rf reading components) which is more accurate than a bird meter, and read the dead key and peak for this radio. 4watt setting = dead key 4watts, swing to 20 10watt setting = dead key 10 watts, swing to 48 watts...
  10. I

    Stryker sr94hpc

    Thanks to you Shockwave, I showed your post and my post to the techs at Stryker and they were nice enough to try the mod out on the sr94hpc themselves with success. Then I did the mod with excellent results. Good job man. Now this radio screams like it should. 45 plus watts just like you said.
  11. I

    RM Italy Amp harmonics to 11th Harmonic at 2 watts input!

    Its funny that hardly anyone is using the old school arrl handbook method for settimg up the transciever or amp. First of all the radio's drive should be adjusted so that the peak wattage is four (4) times the level of the dead key. Even if that means turning up or down the radio's drive to get...
  12. I

    Stryker sr94hpc

    Well are you talking about this radio being overmod, or a different stryker radio? Since this radio doesnt yet have a mod limiter removal mod yet, you must be talking about another stryker radio model. They are not all the same. Any radio with tbe mod limiter taken out and the input audio is...
  13. I

    Cobra 21 GTL a little insight please

    Had a few of these and they are nice radios. If you want to stay on a tight budget and make this radio scream, you can replace the final with a MRF262 (with legs swapped) and then buy a cheap ProComm power mic ($13.00). Then disable the modulation limiter. Keep the power mic at 4 for 100%...
  14. I

    Stryker sr94hpc

    Anyone attempt any other mods on the SR-94HPC? Looking for the modulation limiter to be able to disable and enable it with a switch. Modulation is flat topping way before 100% modulation.
Top Bottom
Back