You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Muito obrigado Andy ...
O amigo como sempre muito prestativo, agradeço muito pelo seu esclarecimento ...
Eu realmente percebi que, mesmo me perguntando se esse problema não está relacionado à troca de rádio. Porque isso só acontece em canais altos, então o rádio em canais altos está...
After a while with the radio turned on in high channels it again showed read variations in TX mode on the frequency meter.
When I soldered a resistor of 100 ohms in the cable welded to the board of the radio the readings even in rx were mistaken, is it that if you do as you mentioned to solder...
Good morning guys .... after breaking my head a lot, I discovered the reason why my FC390 was doing the correct reading of my RX and my TX reading oscillating and totally wrong ...
Letting the chavemanto of my snake 148gtl is installed an expander chanel of 172+ and 16-, of 3 digits
It was the...
if someone has the correct picture of the installation and information about the reason why the frequency converter oscillates the frequency reading in TX (transmission) please send to rciato@outlook.com
Hello everyone, everything good ? I have a problem with installing the FC390 frequency meter on my 148GTL snake. I did the installation of the frequency meter according to the scheme, I did not use any capacitor in the VCO cable, I did some capacitor tests of 47pf / 39pf / 68pf / 100pf / and all...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.